Pneumatic Actuated Ball Valve |
MH series |
3 piece pneumatic actuated valve for high pressure with wide range of pressure and fluid temperature. It's very easy to change seat. | ||||
Connection | Threaded End Rc, Full bore | |||
Material | Stainless | |||
Valve DN | 10 to 40A | |||
Maximum Pressure MPa | 14.0 | |||
Fluids | Water, Oil,Chemicals |
Production Data |
|
|||||||
Body |
SCS14A |
|||||||
Ball |
SCS14A + HCr |
|||||||
Seat |
POM |
R-F-PTFE | ||||||
Stem Seal |
FKM |
Valve Type |
Actuator |
H |
L |
W | |||
Valve |
|
|
|
TAD |
TAO TAC |
TAD/ TAO&TAC |
|
10A |
0 |
050 |
050 |
187 |
187 |
72 |
170/305 |
15A |
1 | 050 | 050 | 193 | 193 |
83 |
170/305 |
0 |
063 |
063 |
208 |
208 |
204/367 | ||
20A | 0 | 063 | 063 | 213 | 213 | 95 | 204/367 |
25A |
1 | 063 | 063 | 229 | 229 |
113 |
204/367 |
0 |
080 |
080 |
262 |
262 |
240/435 | ||
32A |
0 |
080 |
080 |
268 |
268 |
124 |
240/435 |
40A | 0 | 100 | 100 | 315 | 315 |
130 |
294/530 |
NOTE) Correct actuator selection is needed according to pressure and fluid characteristic. Please consult us for your fluid condition. |
||
Pressure / Temperature Rating |
||
Outside Drawing | ||
|
||
|
||
Actuator |
Control action |
Actuator |
|
Double-acting |
|
||
Single-acting |
Reverse |
|
|
Regular |
|
||
Option | |||
LB: LS box for open/close signal detection(two-point type) | |||
LC: Electric-pneumatic integrated positioner Limit SW | |||
BS: Speed control with by-pass valve PPS(Double-acting) | |||
EP: Electro-pneumatic positioner | |||
ES: Smart positioner |
|
|