Electric Actuated Ball Valve T3 series

Electric Actuated Ball Valve

T3 series

		Flanged-end 3 way valve for a wide range of pressure and temperature. Excellent seal nature was realized by trunnion structure and seat spring.

		Connection		J10K flanged, Full bore
		Material		Stainless
		Valve DN		25 to 100A
		Maximum Pressure in MPa		1.0
		Fluids		Water, Oil, Gas, Steam, Chemicals

Production Data

Body	SCS13A
Ball	SCS13A
Seat	G:R-PTFE
Stem Seal	PTFE

Valve Type		Actuator				*H		L	Cv ( ): for straight port
T3		AE1- AE2-	AD1- AD2-	HD1- HD2-	PHR-	AE1 AE2	AD* HD* PHR
Valve DN	Sizing code	AE1- AE2-	AD1- AD2-	HD1- HD2-	PHR-	AE1 AE2	AD* HD* PHR
25A	0	120	300	300	300	230	297	160	26 (45)
25A	2	360	.	.		230	.	160	26 (45)
40A	0	360	300	300	300	253	320	180	65 (129)
40A	2	700	700	700	700	269	320	180	65 (129)
50A	0	700	700	700	700	287	330	200	110 (219)
65A	0	700	700	700	700	297	340	240	160 (300)
80A	0	02K	.	02K	02K	373	380	260	260 (469)
100A	0	02K	.	02K	02K	386	393	330	480 (820)

NOTE: For R-PTFE seat, solvent or high viscous service, please consult for actuator selection. *H: Heat isolation spacer is needed for high temp fluid over170°C X6:High power type (AE25 to 40A)/X2:High power type(AE50 to 65A) +36mm S0:High power type(AE-02K, AD, HD, PDX, PHX, PHR) +5mm S3:High power type(AE-06K, HD-06K, PDX, PHX, PHR) +3mm

Flow Paths (top views of valve)			Outside Drawing
type
T3	form a
	form b
		Position1 Position 2

Pressure / Temperature Rating

Product Code

T3 CODE

Actuator	Power Supply	High-Power		Note		Voltage
	AC	AE1	HD1	Standard ON-OFF type		1: AC100/110V
		AE2	HD2	Built-in relay		2: 200/220V
		AD1/PHR		High speed operation		0: DC24V
		AD2		Built-in relay
	DC	AE2/AD2/HD2		DC power supply type		Option
						L*: Auxiliary signal limit switch
						Other: See the actuator specs